Floating Type Floor Plate

  1. Floating Type Floor Plate

Product Detail

It is a bare stone wool plate produced for areas that require compressive strength and require load bearing, sound insulation, vibration and fire resistance.

Application Areas

It is used for the floors of the buildings, floors between floors and under the vibration source base for the purpose of heat, sound and vibration insulation.

Application Principles

Plates placed on the floor are bonded to the lateral walls of the floor up to the height of the leveling concrete to prevent vibration transfer. Before the trowel coating is poured, it should be covered with a polyethylene fabric. When it is supported with wire and reinforcements (PP fiber), a layer without shrinking cracks will be obtained. Then the application is completed by covering the desired flooring material.

Technical Table

Product IDDensityThicknessDimensions
(mm x mm)
Package (piece)m²/Package
TWYDL1502015020600x1200128.642.5004.250
TWYDL1502515025600x1200125.762.0003.400
TWYDL1503015030600x120085.761.6662.833

Related Products

Reminders on Loading, Unloading, Transport and Storage:

  • It should be done in closed areas in rainy weather.
  • Stretch the canvas even when hey are shipped for short distances.
  • It should be stored in the package and the damaged package should not be used.
  • Packages should not be stacked on top of each other.
  • The products are not be stepped on or used as a step.
  • Before pulling with rope, hard cardboard with dimensions of 50×20 cm size should be
    placed under the rope.
  • Storage area should be closed to prevent leakage during rain, flooding etc.
  • The storage floor must be flat and non-slippery.
  • Loading and unloading should be done with the roof crane.
  • Plates should be carefully transported to the application area by two persons.
Menu