Industrial Blanket (Rabitz Wire)

  1. Industrial Blanket (Rabitz Wire)

Product Detail

High temperature resistant, stitched, rabitz wire coated heat and fire insulation mattress.

Application Areas

It is used for heat and fire insulation in big diameter pipes, industrial plants and
process equipment.

Application Principles

Terrawool Stone Wool Industrial Blankets provide heat and fire insulation in places with high fire resistance. It is wounded on large diameter pipes and the joints are passed through the Rabitz wire of the galvanized wires and sewn. On large surfaces, it is applied in the form of insertion lathes. Sheet metal is coated for the protection.

Technical Table

Product IDDensityThicknessDimensions
(mm x mm)
Package (piece)m²/Package
TWRTSŞ805080501200x500016.001.0001.700
TWRTSŞ806080601200x500016.008331.416
TWRTSŞ808080801200x300013.606251.625
TWRTSŞ80100801001200x300013.605001.176
TWRTSŞ905090501200x500016.001.0001.700
TWRTSŞ906090601200x500016.008331.416
TWRTSŞ908090801200x300013.606251.625
TWRTSŞ90100901001200x300013.605001.176
TWRTSŞ10040100401200x800019.601.2502.125
TWRTSŞ10050100501200x500016.001.0001.700
TWRTSŞ10060100601200x500016.008331.416
TWRTSŞ10080100801200x300013.606251.625
TWRTSŞ1001001001001200x300013.605001.176
TWRTSŞ12550125501200x300013.601.0001.700
TWRTSŞ12560125601200x300013.608331.416
TWRTSŞ12580125801200x300013.606251.625
TWRTSŞ1251001251001200x300013.605001.176

Related Products

Reminders on Loading, Unloading, Transport and Storage:

  • It should be done in closed areas in rainy weather.
  • Stretch the canvas even when hey are shipped for short distances.
  • It should be stored in the package and the damaged package should not be used.
  • Packages should not be stacked on top of each other.
  • The products are not be stepped on or used as a step.
  • Before pulling with rope, hard cardboard with dimensions of 50×20 cm size should be
    placed under the rope.
  • Storage area should be closed to prevent leakage during rain, flooding etc.
  • The storage floor must be flat and non-slippery.
  • Loading and unloading should be done with the roof crane.
  • Plates should be carefully transported to the application area by two persons.
Menu